Performance Data and Weight/Size Specifications
Download Heat Pump Layout Drawings (pdf) - opens in new window
Scroll to bottom for physical size / weight data and links to more information
Heat
Siphon® Swimming Pool Heat Pumps are available in all popular
voltages and electrical supply type to suit almost any country
or location in the world.
Both single and three phase models as well
as 220v and 440v all for both 50Hz and 60Hz are available.
NOTE:
ALL US RESIDENTIAL POOLS
REQUIRE 220 Volt SINGLE PHASE ONLY
The following is a current list of the heat pump models available and their
performance specifications.
All Heat Siphon® Swimming Pool Heat Pumps contain a factory charge of UV Leak Detection Dye visible
under high intensity ultraviolet light capable of detecting freon
leaks as low as 1 ounce per year. These specifications are subject
to change without notice.
NOTE: BREAKER SIZES ARE DETERMINED BASED
ON MAXIMUM CIRCUIT AMPACITY AND ROUNDED UP TO THE NEAREST COMMERCIALLY
AVAILABLE SIZE.
Heat Siphon Performance Data
-
-
All Heat Outputs and COPs are rated at:
AHRI 1160: 80° F (24° C) Air / 82° F (24° C) Water / 63 % Relative Humidity &
Design: 80° F (24° C) Air / 80° F (24° C) Water / 80 % Relative Humidity
NOTE: ALL HEAT SIPHON MODELS USE R410a REFRIGERANT (GREEN GAS)
This is a current list of the BASIC models available and performance
specs. This is not necessarily a complete list of models.
Model*
Volts-Ph-Hz
Breaker
Amps*
BTUH / COP*
80° F/ 80° F/ 80 %
BTUH / COP*
80° F/ 80° F/ 63 %
Heating Only Models - Single Phase 200/220 volt 60Hz
C-Series Analog Models
C250HP
208/230-1-60
30 Amp
56,600 / 5.4
52,400 / 5.0
C325HP
208/230-1-60
40 Amp
92,880 / 6.8
88,400 / 5.8
C375HP
208/230-1-60
40 Amp
96,100 / 6.8
89,000 / 6.3
C5HP
208/230-1-60
50 Amp
122,472 / 6.2
113,400 / 5.7
C575HP
208/230-1-60
50 Amp
126,900 / 6.7
117,500 / 6.2
Z-Series Digital Models
Z250HP
208/230-1-60
30 Amp
54,000 / 5.4
50,000 / 5.0
Z375HP
208/230-1-60
40 Amp
96,120 / 6.7
89,000 / 6.2
Z575HP
208/230-1-60
50 Amp
126,792 / 6.7
117,400 / 6.2
Z700HP
208/230-1-60
50 Amp
145,200 / 6.5
134,500/ 6.0
Heating Only Models - Three Phase 200/220 volt 60 Hz
C-Series Analog Models
C5HP3
200/230-3-60
40 Amp
122,472 / 6.2
113,400 / 5.7
C575HP3
200/230-3-60
40 Amp
122,472 / 6.2
113,400 / 5.7
Z-Series Digital Models
Z575HP3
200/230-3-60
40 Amp
126,792 / 6.7
117,400 / 6.2
Z700HP3
200/230-3-60
40 Amp
140,300 / 6.5
134,500/ 6.0
Cooling Only Models - Single Phase 200/220 volt 60Hz
Z575CP
208/230-1-60
50 Amp
100,000 / NA
92,000 / NA
Heating / Cooling (Reversing) Models - Single Phase 200/220
volt 60Hz
Z575HC
208/230-1-60
50 Amp
124,000 / 6.6
114,800 / 6.1
The following
specifications apply to all models of Heat Siphon listed above:
|
Air Flow
|
5000 CFM |
Air Discharge Vertical Up |
|
Water Flow
|
25 GPM min to 80 GPM max |
Pressure drop < 2 psi @ 80 GPM |
|
Cabinet Materials
|
UV Stabilized Flame retardant PVC |
hardware screws 18-8 stainless steel |
|
Condenser Type
|
Tube-in-shell
Tube-in-shell All PVC housing w/ Gr 2 Commercially Pure Titanium Tubing
Full Flow-No Bypass internal or external-<2 psig pressure drop at 80 GPM |
Control Circuit
(Analog Models)
|
24 volt AC powered by 40va UL class 2 current limiting transformer |
Each Control Wired Separately |
Control Circuit
(Digital Models)
|
24 volt AC powered by Digital Player Controller |
Each Control Wired Separately |
|
Heat Siphon Controls:
|
|
Low Pressure Switch
|
Non-adjustable - Cutout pressure = 93 psig (approx. 32°F air)
Cut in (reset) pressure 135 psig (approx 50°F air) |
|
High Pressure Switch
|
Non-adjustable - Cutout pressure = 560 psig (approx 125°F water)
Cut in (reset) pressure = 400 psig (approx 118°F water) |
|
Expansion Device
|
Thermostatically
controlled expansion valve with proprietary charge and orifice |
Water Thermostat
(Analog Models)
|
Timerstat - Single set-point electronic thermistor sensor
w/1.5°F differential-Maximum setting 104°F |
Water Thermostat
(Digital Models)
|
Dual Set-point (pool or spa) thermistor temperature sensor w/ 1°F differential-Maximum Set-Point = 98°F in pool mode / 104°F in spa mode |
Time Delay
(Analog Models)
|
TimerStat Electronic 5 minute restart delay |
Time Delay
(Digital Models)
|
Digital Player Controller Software driven 5 minute restart delay |
|
