IMPORTANT NOTICES:
The following filter cartridges ARE NOT compatible with the BLASTER
Automatic Filter Cleaners:
Jacuzzi TriClops Sta-Rite PLD 50 & 70 Sta-Rite System 2
Sta-Rite System 3
The Neoterics Blaster will not work with any filter that is not
completely round or has any protrusions.
BEFORE ORDERING, DETERMINE THE FLOW RATE OF YOUR FAUCET TO BE SURE YOUR
NEOTERICS BLASTER WILL WORK AS DESIGNED.
Take a 5 gallon
bucket and fill with water using the highest flow rate. Measure the time
it takes to fill the bucket. If the process takes a minute or more, you
will not achieve good results and we recommend against purchasing. For
best results, your GPM should be at least 10. That would mean you
should be able to fill the 5 gallon bucket in 30 seconds or less.
Anything between 6 and 10 will yield varying efficacy.
► FILTER SIZES:
UP TO 20" IN
LENGTH
► SPRAY JETS: FULL EXTENSION
20"
► FILTER RPM: 0.8 (10"
diameter)
1.1 ( 7" diameter)
1.8 ( 5" diameter)
► WATER FLOW RATE:
10 GPM
(recommended)
6 GPM
(minimum)
Tired of cleaning your dirty
filter? Tired of all the mess?
Let the Neoterics Blaster 1000 do it for you! The Neoterics
Blaster 1000 Automatic Filter Cleaner automatically rotates your filter
while PowerJets spray focused water deep inside the filter pleats.
As your filter is slowly rotated, dirt and debris will be blasted from
your filter in no time at all.
Cleaning your filter no longer has to be a messy, wet chore. The
Neoterics Blaster 1000 is completely automatic! Just load the
filter, turn the water on, and it does the rest. In just minutes
your filter is clean!
FILTER SIZES: UP TO 20" IN LENGTH
DIMENSIONS: 24" x 12" x 6"
Be sure to watch this short
video to see the Neoterics Blaster Automatic Filter Cartridge
Cleaner in action - (may require browser plugin to work)
►
INSTRUCTION MANUAL
(PDF)
SHIPS VIA: UPS or FedEx
Availability: in stock
|