IMPORTANT NOTICES:
The following filter cartridges ARE NOT compatible with the BLASTER Automatic Filter Cleaners:
Jacuzzi TriClops
Sta-Rite PLD 50 & 70
Sta-Rite System 2
Sta-Rite System 3
The Neoterics Blaster will not work with any filter that is not completely round or has any protrusions.
BEFORE ORDERING, DETERMINE THE FLOW RATE OF YOUR FAUCET TO BE SURE YOUR NEOTERICS BLASTER WILL WORK AS DESIGNED.
Take a 5 gallon bucket and fill with water using the highest flow rate. Measure the time it takes to fill the bucket. If the process takes a minute or more, you will not achieve good results and we recommend against purchasing. For best results, your GPM should be at least 10. That would mean you should be able to fill the 5 gallon bucket in 30 seconds or less. Anything between 6 and 10 will yield varying efficacy.
►
FILTER SIZES:
UP TO 27" IN LENGTH
►
SPRAY JETS:
PARTIAL EXTENSION 16"
►
FILTER RPM:
0.8 (10" diameter)
1.1 ( 7" diameter)
1.8 ( 5" diameter)
►
WATER FLOW RATE:
10 GPM
(recommended)
6 GPM
(minimum)
Tired of cleaning your dirty filter? Tired of all the mess?
Let the Neoterics Blaster 2000 do it for you! The Neoterics Blaster 2000
Automatic Filter Cleaner automatically rotates your filter while
PowerJets spray focused water deep inside the filter pleats. As
your filter is slowly rotated, dirt and debris will be blasted from
your filter in no time at all.
Cleaning your filter no longer has to be a messy, wet chore. The
Neoterics Blaster 2000 is completely automatic! Just load the filter,
turn the water on, and it does the rest. In just minutes your
filter is clean!
FILTER SIZES: UP TO 27" IN LENGTH
DIMENSIONS: 31" x 12" x 6"
Be sure to watch this short video to see the Neoterics Blaster Automatic Cartridge Filter Cleaner in action
SHIPS VIA: UPS or FedEx
Availability: in stock
|